Vertical Sealing VVI.pptVIP

Vertical sealing unit Drive Adjustment (vertical) Adjustment (horizontal) Perforation technic Adjustable bag tear notch at vertical seal * The vertical sealing unit is closing the edges of the pre-formed packing material tube. and by application of pressure (cylinder) on the packing material. which is driven by a three-phase motor (driving reel) This is achieved by a heated circulating steel belt Sealing bar Heater Pneumatic cylinder Holder The vertical sealing band drive is turningsynchronized with the packing material drive. The vertical sealing band speed may be adjusted if necessary (dependent on film) on the frequency converter or optional in the Touch Screen. Driving reel Rubber Draw Down on Steel Roller 3-phase motor Frequency converter The vertical sealing band is sealing the pre-formed packing material to a tube by application of pressure and heat. The vertical parallelism to the tube is being adjusted by setting screws. (Basic setting). Setting screws Adjustment The horizontal adjustment against the forming tube is set by setting screws. (Basic setting). The vertical sealing band distance to the forming tube is being adjusted by a pivot locking lever on size change. Lock Adjustment