基站代码全译.docVIP

ERICSSON WIDE INFORMATION RBS2000 ALARM DESCRIPTION ? Uppgjord - PreparedKI/ERA/LRB/J Finn Magnusson Datum - Date2000-02-08 RevPA12 Dokumentnr - Document noERA/LRB-99:369 Godk?nd - ApprovedKI/ERA/LRB/J Kontr - Checked? ? Tillh?r/referens - File/reference? RBS 2000 Fault Codes Description (CME R7.1) ? The purpose of this document is to give a description of the different fault codes, list possible reasons and suggest corrective actions. Further information on fault finding and corrective actions is provided in maintenance manual.本文章给出了故障码的描述，列出可能的故障原因和解决的一些方法。在维护手册里提供了更多的查找和改正故障的方法。 BTS Fault Reporting BTS 故障报告 SW subsystems in BTS supervise their environment and report faults to the OM Subsystem (OMS). After fault filtering, OMS sets a fault on the Managed Object (MO) responsible for the faulty area. The MO sends a fault report to BSC indicating importance and origin of fault:BTS 的软件子系统监控环境并将故障报告到操作维护子系统（OMS）。OMS过滤故障后，将其放置到与故障区域相对应的管理对象（MO）中，并将故障报告发送到BSC指示出故障的原因和重要性： Class I1A: fault inside MO, affecting MO functionality.等级l1A：MO中的故障，影响MO的功能。 Class I1B: fault outside MO, affecting MO functionality. 等级l1B：MO外的故障，影响MO的功能。 Class I2A: fault inside MO, not affecting MO functionality.等级l2A：MO中的故障，不影响MO的功能。 Class EC1: fault outside BTS, affecting MO functionality.等级EC1：BTS外的故障，影响MO的功能。 Class EC2: fault outside BTS, not affecting MO functionality. 等级EC2：BTS外的故障，不影响MO的功能。 Fault reports coming from MO CF and TRXC also contain a RU map designating possible faulty HW unit(s). 来自于MO CF和TRXC的故障报告同时包含了指示出可能的故障硬件（HW）单元的替换单元码（RU）。 Upon reception of a BTS fault report, BSC takes following actions:根据接收到的BTS故障报告，BSC产生下列的动作： Class I1A:the MO is taken out of operation and tested. Class I1A:MO被退出工作并测试。 - If test result indicates MO not faulty, the MO is taken back into operation and the fault is considered as intermittent. A fault counter keeps track of intermittent faults and the MO will be permanently taken out of operation if the number of intermittent faul