2440inits.docVIP

; ; NAME: 2440INIT.S ; DESC: C start up codes ; Configure memory, ISR ,stacks ; Initialize C-variables ; GET option.inc GET memcfg.inc GET 2440addr.inc BIT_SELFREFRESH EQU 1 22 ;Pre-defined constants USERMODE EQU 0x10 FIQMODE EQU 0x11 IRQMODE EQU 0x12 SVCMODE EQU 0x13 ABORTMODE EQU 0x17 UNDEFMODE EQU 0x1b MODEMASK EQU 0x1f NOINT EQU 0xc0 ;The location of stacks UserStack EQU _STACK_BASEADDRESS-0x3800 ;0x33ff4800 ~ SVCStack EQU _STACK_BASEADDRESS-0x2800 ;0x33ff5800 ~ UndefStack EQU _STACK_BASEADDRESS-0x2400 ;0x33ff5c00 ~ AbortStack EQU _STACK_BASEADDRESS-0x2000 ;0x33ff6000 ~ IRQStack EQU _STACK_BASEADDRESS-0x1000 ;0x33ff7000 ~ FIQStack EQU _STACK_BASEADDRESS-0x0 ;0x33ff8000 ~ ;Check if tasm.exe armasm -16 ...@ADS 1.0 is used. GBLL THUMBCODE [ CONFIG 16 THUMBCODE SETL TRUE CODE32 | THUMBCODE SETL FALSE ] MACRO MOV_PC_LR [ THUMBCODE bx lr | mov pc,lr ] MEND MACRO MOVEQ_PC_LR [ THUMBCODE bxeq lr | moveq pc,lr ] MEND MACRO $HandlerLabel HANDLER $HandleLabel $HandlerLabel sub sp,sp,#4 ;decrement sp to store jump address stmfd sp!, r0 ;PUSH the work register to stack lr does not push because it return to original address ldr r0, $HandleLabel;load the address of HandleXXX to r0 ldr r0,[r0] ;load the contents service routine start address of HandleXXX str r0,[sp,#4] ;store the contents ISR of HandleXXX to stack ldmfd sp!, r0,pc ;POP the work register and pc jump to ISR MEND IMPORT |Image$$RO$$Base| ; Base of ROM code IMPORT |Image$$RO$$Limit| ; End of ROM code start of ROM data IMPORT |Image$$RW$$Base| ; Base of RAM to initialise IMPORT |Image$$ZI$$Base| ; Base and limit of area IMPORT |Image$$ZI$$Limit| ; to zero initialise IMPORT MMU_SetAsyncBusMode IMPORT MMU_SetFastBusMode ; IMPORT Main ; The main entry of mon program IMPORT RdNF2SDRAM ; Copy Image from Nand Flash to SDRAM AREA Init,CODE,READONLY ENTRY EXPORT __ENTRY __ENTRY ResetEntry ;1 The code, which converts to Big-