DAEMONTools虚拟光驱卸载.docxVIP

此文章据说是翻译于daemon的官方资料，因此是英汉对照。我根据自己操作的实际做了一点小小的补充。 方法如下： 1. Open device manager (SCSI/RAID Controllers section) and delete SCSI controller with name corresponding with name of Daemon driver (miniport driver name). If you have problems doing it (eg. system crashes) then start from step 3 (skip steps 1 and 2). 步骤1、打开设备管理器（“SCSI和RAID控制器”部分）然后删除对应Daemon驱动名（miniport driver名）的SCSI controller设备。若出现问题导致这个步骤不能进行（例如系统崩溃）则从步骤3开始（跳过步骤1和步骤2）。 2. Open device manager (System devices section) and delete device with driver corresponding with Daemon driver (bus driver name). In current versions of Daemon Tools it is PnP BIOS Extension but most likely it may change in next versions. Again, if you have some problems doing it, skip this step 步骤2、打开设备管理器（“系统设备”部分）然后删除对应Daemon驱动名（bus driver名）的设备。当前版本的Daemon Tools中这个设备名是“PnP BIOS Extension”但下个版本里很有可能会换个名字。再说一次，如果进行这个步骤有问题的话，请跳过这一步。 3. Find Daemon driver files in Windows\System32\Drivers folder (in Win95/98/ME also check Windows\System\IOSUBSYS folder). Make sure your system is configured to display system files (ControlPanel-Tools-FolderOptions-View) in order you can see them. Delete Daemon driver files. default v3.46 driver file names are d346bus.sys and d346prt.sys default v3.47 driver file names are d347bus.sys and d347prt.sys 步骤3、在Windows\System32\Drivers文件夹中查找Daemon驱动文件（在Win95/98/ME系统中还要查找Windows\System\IOSUBSYS文件夹）。为了能看到这些文件请确定你的系统已经配置为“显示系统文件”了（控制面板-工具-文件夹选项-查看）。删除Daemon驱动文件。 默认的3.46版本驱动文件名是d346bus.sys和d346prt.sys 默认的3.47版本驱动文件名是d347bus.sys和d347prt.sys 4. In WinNT/2000/XP/2003 open registry editor and check HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services for entries with same names as Daemon driver files. Delete these keys. 步骤4、WinNT/2000/XP/2003的系统请打开注册表编辑器然后检查 HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services中跟Daemon驱动文件同名的条目。删除这些项。 5. Find d347bus and d347prt in registry and delete(347 is your daemons version). Reboot your system. If