- 3
- 0
- 约1.51万字
- 约 33页
- 2016-09-20 发布于辽宁
- 举报
本科毕业论文- 交流电压与频率测试仪.doc
摘要
随着信息化、数字化在各行各业的迅猛发展,系统中的信息化、数字化也将成为未来的发展趋势。狭小的空间操作,经常要面对功能众多、大小不等、量程各异的仪表盘,这些仪表盘不仅占用空间,而且不够直观,容易造成人员的误操作或反应滞后,给操作带来不必要的麻烦。交流电频率、电压测量的简化系统的操作,AT89C52;AD0809;
Abstract
With digital informatization in the rapid development of all walks of life, industrial system of informatization, digital will also become the future trend of development. Especially in the narrow space when operating, often face many functions, sizes, different range instrument panel. These instrument panel not only occupy a space, and not enough intuitive, easy to cause the working staff of the incorrect operation or reaction lag, give operating cause unnecessary trouble. So using AC frequency and voltage measurement technology, design the voltage frequency monitoring system, may simplify system operation space, improve work efficiency.
This design taking single chip computer AT89C52 as a core,combining the periphery signal to enlarge and the shaping circuit, through to the output waveforms of the count and the simulated voltage sampling, the quantitative get ac frequency and voltage the digital quantity. These data are sent to the upper computer by a series port and visual display,realizing the monitoring of the frequency and voltage. Design is simple in structure, measurement error small, has high practical value.
Keywords:single chip computer;frequency;voltage;sampling;AT89C52;AD0809;
目录
1绪论 1
1.1问题的提出 1
1.2设计的意义 1
1.3设计的主要内容 1
1.3.1本设计的主要内容 1
1.3.2设计实现的主要功能 1
1.3.3设计的主要技术指标 2
2系统概述 3
2.1电压/频率的测量方法 3
2.1.1直接测频法 3
2.1.2A/D转换法 5
2.2系统方案选择 5
2.3系统总体框图 5
3系统硬件电路的设计 7
3.1单片机处理控制电路 7
3.2频率信号预处理电路 8
3.2.1降压电路 8
3.2.2放大电路 9
3.2.3整形电路 9
3.3A/D转换电路 10
3.4晶振电路部分 11
3.5LCD显示电路 12
3.5.1LCD选型 12
3.5.2接口说明 13
3.6电源电路的设计 14
3.7串口通信电路 15
4系统控制软件设计 19
4.1系统软件框图 19
4.2频率测量子流程图 20
4.3A/D转换子流程图 21
4.4显示子程序 22
总结体会 25
致谢 27
参考文献 28
外文资料 29
中文翻译 30
1绪论
1.1问题的提出
随着信息化、数字化在各行各业的迅猛发展,系统中的信息化、数字化也将成为未来的发展趋势。狭小的空间操作,经常要面对功能众多、大小不等、量程各异的仪表盘,这些仪表盘不仅占用空间,而且不够直观,在情况紧急时,容易造成人员的误操作或反应滞后,给操作带
您可能关注的文档
- 本科毕业论文- 化妆品与形象设计专业职业规划书.doc
- 本科毕业论文- 化工设计 年产55万吨甲醇精馏车间设计 粗甲醇预热器设计正文.doc
- 本科毕业论文- 黄石门铁矿尾矿库取砂工程初步设计.doc
- 本科毕业论文- 基础设计教材送审讲稿本科毕业论文.doc
- 本科毕业论文- 混联式电动汽车整车匹配与直流电机驱动系统设计.doc
- 本科毕业论文- 机械剪板机设计本科毕业论文.doc
- 本科毕业论文- 机械制造工艺基础.doc
- 本科毕业论文- 基于 multisim 的高频放大器的设计与分析.doc
- 本科毕业论文- 基于3m人形机器人系统说明书.doc
- 本科毕业论文- 基于51单片机多功能电子时钟设计报告本科毕业论文.doc
原创力文档

文档评论(0)