EthernetIOSet-Up.pptVIP

Ethernet I/O Set-Up This presentation will step through a typical configuration of the DVT CON-IOE. Intellect 1.0 is used for the software portion. Identifying the Hardware The CON-IOE is made up of several modules The Ethernet Bus Coupler Ethernet Output Modules Ethernet Input Modules Power IN Module Camera Breakout Board CON-IOE-BRK a Connecting Wires to the Terminals Supplying Power to the Device The CON-IOE requires 24VDC to be supplied to the Bus Coupler and the Power IN Module Powering to the Ethernet Bus Coupler Connect +24VDC to pins 1.1, 1.2, and 2.2 on the Ethernet Bus Coupler.