从数字化产品课程.pptVIP

Structure Damage Identification Technique Based on OPCM Sensors and Gabor wavelet Y. Luo R.R. Gong J.Z. Gu G.Q. Zhao Faculty of Science, Jiangsu University, Zhenjiang，Jiangsu,212013, P.R.China AET Acoustic Emission Technique Prominent advantage real time monitoring dynamic monitoring convenience covering large areas acquiring original damage information by AE sensors PZT sensors Advantage high sensitivity wide bandwidth high measure precision stabilization acquiring original damage information by AE sensors Disadvantage have uniform sensitivity to orthotropic stress waves sensing signal easily influenced by transverse stress wave influence the damage identification Model and characteristics of OPCM sensors Comparing between PZT and OPCM Comparing between PZT and OPCM Structure damage identification Structure damage identification Gabor wavelet time-frequency analysis Gabor wavelet time-frequency analysis Structure damage identification Experiment research Experiment research Experiment research Experiment research Conclusions Other research in our workshop * * Introduction SHM Structure Health Monitoring Significance Crack-growth detection and monitoring Fig.1 The model of OPCM sensor The coupling relation equation between induced strain and the deformation of piezoelectric phase is From above equation, the obvious orthogonality can be seen because longitudinal and traverse piezoelectric strain constants, is commonly. Characteristics OPCM sensor good flexibility high intensity large strain light weight its orthotropic characteristics to stress wave distinguish stress wave of different components on the same surface Research prove orthotropic characteristics by computation with FEM and experiment Fig.2 The numerical simulation result of FEM Fig.3 FFT of experiment result OPCM sensor is only sensitive to the longitudinal wave for its orthotropic sensing characteristics. PZT sensor is more complex in r