《培训手册》(EICO式样).docVIP

PRIMER BOOTH USE AND INSTRUCTION HANDBOOK A 04.08.08 FIRST ISSUE BELLAGAMBA BELLAGAMBA JULITTA Rev. Data Description By Checked Approved TABLE OF CONTENTS 1 PRIMER BOOTH 3 1.1 GENERAL DESCRIPTION 3 1.2 WORKING PRINCIPLE 6 1.3 REFERENCE DRAWINGS 10 2 SYSTEM CLEANING AND MAINTENANCE 10 2.1 ORDINARY PREVENTIVE MAINTENANCE TABLES 10 2.2 ORDINARY PREVENTIVE MAINTENANCE TABLES 12 2.3 INSTRUCTIONS FOR SAFELY PERFORMING USE AND MAINTENANCE OPERATIONS FOR PAINTING BOOTHS 12 2.3.1 RISKS OF FIRE 12 2.3.2 HEALTH MEASURES AND PRECAUTIONS 13 2.3.3 ORDINARY MAINTENANCE OPERATIONS 14 2.3.4 EXTRAORDINARY MAINTENANCE AND/OR REPAIRS 14 PRIMER SPRAY BOOTH GENERAL DESCRIPTION The goal of this booth is to realize an ideal working area to apply the first paint layer called primer on the body. This has been divided into five 5 areas: 1° Tack-rag, 6 m long, for body tack rag and clean. 2° Tack-rag, 6 m long, for body tack rag and clean. Internal manual, 6 m long, where the body is painted in its internal parts with pistols manuals by operators. External manual, 6 m long, where the body is painted in its external parts with pistols manuals by operators. Flash-off room temperature , 4 m long. In this zone car body is dried before entering the baking oven. This subdivision refers to 1° phase, in case you decide to move to 2 ° phase 40,000 v / h , the supply must be increased with a new AMU and a fan of extraction. The line would be longer of 12 m, the current tack rag become No. 2 positions painting Interior Manuals. In the scheme 00M00SC 01400 is well represented the difference between the 1 and 2 ° phase. Fig. 1.1 – Primer booth aeraulic schematic The primer booth lies on level + 5.800 mm and develops along a total length of 28 m. It is made of an upper part, including the painting chamber and the plenum for air distribution, and a lower part made of a wet bottom incorporated in the air extraction chamber. The upper part is made of a self-supporting structure to which are fixed t