赴新加坡学习培心得.doc.docVIP

新加坡培训学习心得 株洲职业技术学院 王维斌 为加强教师的培养，拓宽专业教师的海外视野，学习先进的职业教育理念和教学模式，教学方法，专业、课程的开发方法，实习实训基地的建设经验，提高教师的综合素质，受学院的派遣，我有幸参加了省教育厅组织的省高等职业院校教师新加坡培训团，在新加坡进行了为期二十天的参观学习。在培训期间通过讲座，参观等多种途径对新加坡的国情，教育，经济，文化各方面等进行了全面的了解，通过在新加坡南洋理工学院，共和理工学院，义安理工学院三所职业院校的参观学习与考察，对新加坡的职业教育进行了系统学习和深入的了解，现将本次培训学习情况总结如下： 一、深深的感受到了“花园城市”的魅力 通过讲座，参观，亲身体验使我对新加坡的国情，政治，经济，文化，教育等各方面有了深入的了解，这样一个面积仅有七百多平方公里，资源匮乏，就连淡水都没有的岛国，却成为了全球最为富裕的国家之一是亚洲重要的金融、服务和航运中心之一。新加坡是继伦敦、纽约和香港之后的第四大国际金融中心 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its overall quality, poor-quality parts replacement. Supply good quality of purchasing instrument and ovality of the guarantee instrument tubes as small as possible, selection of high quality, high precision sleeve connector. Instrumen