Simulation for the Polygonal Coil Magnetic Field.docVIP

Simulation for the Polygonal Coil Magnetic Field 　　Abstract：： Based on the study of Helmholtz coils， the intensity distribution of polygons coil magnetic field and characteristics of intensity of that magnetic field is given， this lay the foundation for some industrial application is showed here. 　　Key words：： Helmholtz coils； Polygon current carrying coils； Simulation 　　Lü， X.， Tian J. B. （2013）. Simulation for the Polygonal Coil Magnetic Field. Progress in Applied Mathematics， 6（2）， 43-49. Available from http：// www. /index.php/pam/article/view/j.pam.1925252820130602.9005 　　DOI： 10.3968/j.pam. 1925252820130602.9005 　　 1. INTRODUCTION 　　Helmholtz coils is widely used in the industrial fields. the feature of that magnetic field produced by two current-carrying coils is approximately uniform near the center region， some researcher give a quantitatively analysis on the spatial distribution of the field Helmholtz coils [1-3]； based on the study of two current carry coils which has the same axis ， Zhang Jike set the parameter about three current carrying coils in a rational way [4-5]， giving the conclusion that the magnetic field produced by three coils have better character over the standard Helmholtz coils both in strength and uniformity. However， in the actual process of manufacturing and production， polygon current-carrying coil is more easy to manufacturing， so the simulation of intensity distribution feature of the magnetic field produced by polygonal coil is given here .it provides a comparison for the magnetic field produced by both circular loop and polygons coil and also give a reference for the manufacturing for industrial polygons carrying coils. 　　 2. THEORETICAL ANALYSIS 　　The geometrical structure of the Helmholtz coils is shown in Figure 1. 　　According to Biot-Savart Law， the strength at P of the magnetic field produced by A is： 　　According to the principle of superposition [7]， the total magnetic field at P produced by A， B is： 　　But whe