S350高性能量变频器.docVIP

S350高性能矢量变频器 产品特点■采用最新高速电机控制专用芯片DSP，确保矢量控制快速响应■无PG矢量控制、有PG矢量控制、转矩控制、V/F控制可灵活选择■有PG矢量控制低频力矩达180%，无PG矢量控制低频力矩达150%，输出平稳■硬件电路模块化设计，确保电路稳定高效运行■稳速精度可达±0.2%，低速时速度变化率小，运行平滑■内置先进的PID算法，响应快、适应性强、调试简单■内置简易PLC功能，实现定时、定速、定向等多功能逻辑控制，以灵活的控制 方式满足各种不同复杂的工况要求■内置直流制动加能耗制动，快速实现制动停机■配备RS485接口，内置国际标准MODBUS RTU/ASCII通讯协议，可通过 PC/PLC等上位机实现变频器组网集中控制■输入电压范围广，具备输出自动稳压（AVR）功能，瞬间掉电不停机■独特的“挖土机”自适应控制特性，电机转矩上限自动限制，抑制过电流■强大的输入输出多功能可编程端子，可方便实现16段速，接收高速脉冲输入， 两路模拟输出自由选择■采用独立风道设计，风扇可自由拆卸，散热性好 ?更多描述S350系列应用案例：·三晶S350变频器在洗涤设备上的应用方案·三晶S350变频器在空压机节能改造的应用·三晶S350变频器在数控车床主轴控制方案·三晶S350变频器在高速电机上的应用方案7.5KW 含7.5KW 外形尺寸表： 11KW 含11KW 以上的外形尺寸表 center pin checks and anchoring the inner cylinder. According to While coupling alignment should keep oil out of cavity and locate the rotor axis neck raised are within the prescribed limits, there should be no gaps, Horn, Horn and Horn 0.05mm feeler gauges fit into. Center coupling, condenser water filling and water-filled according to factory requirement. For coupling three supported rotor Center, the mouth under the coupling between the value should be as stipulated in the manufacturer, usually 0.15~0.25mm. In the case of coupling connection, if possible, lifting only one bearing end of the support bearing of the rotor, remove the bearing, fitted with special tiles and special lifting tools, disc rotors, check the journal flutter tile, should generally be less than 0.10MM. When the couplings and rotor comes when there is a conflict, the coupling Centre shall prevail. 6.4.5.2.2 shaft looking for: ... 6.4.5.3. Provisional bolt confirmed the positioning of the rotor size, as well as the coupling between the adjustment shim thickness accuracy, drawings to meet the technical requirements. Plane, cylindrical and clean the coupling bolt holes should be clean and without burrs, scrap iron and grease-free, relative position of the coupling according to the drawing requirements are. Coupling top screws, round distance apart, indicators to monitor movement of the