3工程力学材料学答案.docVIP

3-1 已知梁AB上作用一力偶，力偶矩为M，梁长为，梁重不计。求在图ab，c三种情况下，支座A和B的约束力 解：(a) (b) 受力分析，画受力图；A、B处的约束力组成一个力偶； 列平衡方程： (c) 受力分析，画受力图；A、B处的约束力组成一个力偶； 列平衡方程： 3-2 在题图所示结构中二曲杆自重不计，曲杆AB上作用有主动力偶，其力偶矩为M，试求A和C点处的约束力。 解：(1) 取BC为研究对象BC为二力杆 (2) 取AB为研究对象 3-3 齿轮箱的两个轴上作用的力偶如题图所示，它们的力偶矩的大小分别为M1=500 Nm，M2 =125 Nm。求两螺栓处的铅垂约束力。图中长度单位为cm。 解：取整体为研究对象 3-5 四连杆机构已知OA=0cm，=40cm，作用上的力偶矩大小为=1N.m，求力偶矩AB所受的力。 解：(1) 研究BC杆，受力分析，画受力图： 列平衡方程： (2) 研究AB（二力杆），受力如图： 可知： (3) 研究OA杆，受力分析，画受力图： 列平衡方程： 3-7 O1和O 2圆盘与水平轴AB固连，O1盘垂直z轴，O2盘垂直x轴，盘面上分别作用力偶（F1F’1），（F2F’2）如题图所示。如两半径为r=20 cm, F1 =3 N, F2 =5 N,AB=80 cm,不计构件自重，试计算轴承A和B的约束力。 解：取整体为研究对象 (2) 列平衡方程： AB的约束力： 3-8 在图示结构中，各构件的自重都不计，在构件BC上作用一力偶矩为M的力偶，各尺寸如图。求支座A的约束力。 解：(1) 取BC为研究对象 (2) 取DAC为研究对象 画封闭的力三角形； 解得 and due diligence evaluations article 22nd head office, branch (jurisdiction), risk management, marketing management branch within the Departments credit business person assumed responsibility for the supervision and inspection and due diligence evaluations. Article 23rd, Head Office, branches (jurisdiction), risk management, Marketing Management Department through on-site and off-site inspection, investigation report, interviews with investigators for pre-loan investigation work by way of conducting supervision and inspection, quality evaluation pre-loan investigation work, and based on the evaluation results, the implementation of diversity management. 24th the control and inspection (a) the implementation of the credit system: there is no breach of credit policy relating to the granting of credit and the head office; (B) dual credit rating: timeliness of ratings, whether the provisions of the rating, rating results are accurate; (C) the survey contents: data collection is complete, report writing is comprehensive, indicators analysis is objective, real, conclusions and the facts are consistent and reasonable; (D) double implementation of investigations system: practi