陕西科技大学电学院自动化(2015年)生产实习温度、照度系统开发板程序.docVIP

/******************************呼吸灯****************************/ #include reg52.h #define uint unsigned int int i; sbit duan=P3^2; void delay(uint n) { uint i,j; for(i=n;i0;i--) for(j=114;j0;j--); } void main(void) { TMOD = 0x01; TH0 = 0XFF; TL0 = 0XF0; ET0 = 1; EA = 1; TR0 = 1; while(1) { for(i=0;i50;i++) { delay(8); } for(i=50;i=0;i--) { delay(8); } } } void timer0() interrupt 1 using 1 { uint l; TR0 = 0; l++; if(l=100) { l=0; } if(li) { duan=0; } else { duan=1; } TH0 = 0Xff; TL0 = 0Xf0; TR0 = 1; } /******************************按键灯珠****************************/ #include reg52.h #define uint unsigned int //uint i; signed int i; sbit duan = P3^2; sbit s1 = P1^0; sbit s2 = P1^1; void delay(uint n) { uint i,j; for(i=n;i0;i--) for(j=114;j0;j--); } void main(void) { TMOD = 0x01; TH0 = 0XFF; TL0 = 0XF6; ET0 = 1; EA = 1; TR0 = 1; i = 50; while(1) { if(s1==0) { delay(10); if(s1==0) { i = i-10; if(i==0) i = 50; while(!s1); //duan = 0; //while(!s1); } } if(s2==0) { delay(10); if(s2==0) { i = i+10; if(i==100) i = 50; while(!s2); //duan = 1; //while(!s2); } } } } void timer0() interrupt 1 using 1 { uint l; TR0 = 0; l++; if(l=100) { l=0; } if(l=i) { duan=0; } else { duan=1; } TH0 = 0Xff; TL0 = 0Xf6; TR0 = 1; } /******************************串口通信****************************/ #include reg52.h #include BH1750.h #define uchar unsigned char #define uint unsigned int sbit RS = P2^5; sbit EN = P2^3; sbit RW = P2^4; unsigned char flag,a,i; uchar table[]; uchar temp; signed int n = -2,l = 1; void init() { TMOD=0x20; TH1=0xfd; //9600 TL1=0xfd; //9600 TR1=1; REN=1; SM0=0; SM1=1; EA=1; ES=1; } void delayl(uint n) { uint i,j; for(i=0;in;i++) for(j=0;j115;j++); } void LCD_write_command(uchar aa) { RS = 1