如何用ps制作亮的立体字.doc

如何用ps制作漂亮的立体字 1。首先新建一个前景为白色，背景为黑色的文档，输入文字 2。将文字删格化，ctrl+T自由变换，调整到如图的效果， 然后选择斜面浮雕，默认值即可！ 3。然后再新建一层，与文字层合并，选择滤镜-模糊-高斯模糊，模糊半径调的小点 4。接下来按住ALT键，不停的按方向键↑上，效果基本就出来了 隐藏背景层-合并所见图层-在显示背景层，操作如下： 5。复制合并后的图层（按住ALT，在图上用鼠标拖动），将图片移动到如图所示位置（红线处，前后对齐）。 6。调整图层透明度-给图层1副本蒙版，切换到橡皮工具，擦掉多余的部分，okay一个简单的立体字效果就出来了~！~~~ 效果图1： 你也可以根据这个方法作出其他立体效果~~~ 1。 2。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electri