实验四：利用Wndows Server 2003搭建DHCP服务器.doc

实验四 实验题目：Windows Server 2003下DHCP服务器的搭建 实验目的：使学生掌握Windows Server 2003下DHCP服务器的配置 实验设备：计算机、Windows Server 2003光盘 实验学时：2 实验步骤： 安装DHCP服务 打开控制面版，双击添加删除程序。 2、点击添加/删除windows组件。 3、双击网络服务 4、在DHCP选项前打上对勾 5、点击确定直至完成 搭建DHCP 打开控制面板，进入管理工具，双击DHCP。 先将名字前方加号点开，之后右键点击本机器名字命名的选项，新建作用域。 名称为本机ip地址最后一段。 将本机ip地址输入“起始ip地址”点击添加，表示添加成功。 添加网关，即教室路由器出口ip。 域名称和dns服务器，此页面可以不填。 DHCP服务器搭建成功 新建保留。点开作用域，右键点击保留，选择新建保留 保留名称任意，ip地址为保留ip，mac地址为被保留pc的mac地址（在命令行窗口下输入ipconfig/all查看），描述任意 保留成功 利用其他主机测试DHCP服务。在Ipv4网络ip地址获取中选择自动获取，得到一个服务器分配的ip地址。DHCP服务器配置成功。 实验思考题： 1. 能否通过交换机充当DHCP服务器？如可以，用二层交换机还是三层交换机？ 2. DHCP服务器的IP是否必须要和IP值在同一子网，说明原因，如果在同一子网，该IP是否需要做排除？如果不做排除，地址租约中会出现什么样的效果？ 3. 设计一个实验，使租约生效。 4. DHCP服务器是否需要为客户端分配网关及DNS，描述原因。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly