数据库原理及应课程设计指导书.docVIP

数据库原理及应用课程设计指导书 闫俊英 适用专业：计算机科学与技术 上海电机学院 2011年11月  目 录 前言································································3 1 课设目的与意义····················································4 2 课程设计内容······················································4 3课程设计方法·······················································4 4 课程设计要点······················································5 5 课程设计报告······················································5 5.1课程设计报告结构··········································5 5.2 课程设计报告排版·············································5 6 课程设计成绩考核··················································6 前 言 课程设计作为一门实践性课程，通过课程设计，使学生掌握数据库系统的基本概念、原理和技术，将理论与实际相结合，应用现有的数据建模工具和数据库管理系统软件，规范、科学地完成一个小型数据库的设计与实现，把理论课与实验课所学内容综合，并在此基础上强化学生的实践意识、提高其实际动手能力和创新能力。 一、课程设计的目的和意义（黑体 小四号 ） 通过课程设计，使学生掌握数据库系统的基本概念、原理和技术，将理论与实际相结合，应用现有的数据建模工具和数据库管理系统软件，规范、科学地完成一个小型数据库的设计与实现，把理论课与实验课所学内容综合，并在此基础上强化学生的实践意识、提高其实际动手能力和创新能力。问题描述。包括此问题的理论和实际两方面。 解决方案。包括：E-R模型要设计规范、合理，关系模式的设计至少要满足第三范式，数据库的设计要考虑安全性和完整性的要求。 解决方案中所设计的E-R模型、关系模式的描述与具体实现的说明。 具体的解决实例《社《》主编，出版社， appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the