米歇尔携女儿亲船游览颐和园(转载).docVIP

米歇尔携女儿亲友乘船游览颐和园 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 李拓摄 中国青年网北京3月22日电（记者 张炎良李拓）今天下午3点20分许，美国总统奥巴马夫人米歇尔携女儿亲友乘船游览颐和园。 3月22日下午，美国第一夫人米歇尔·奥巴马在北京颐和园乘坐龙舟游览。摄影：赵昀/东方早报 米歇尔在颐和园乘游船，右边是美国驻华大使鲍卡斯。摄影：薛珺/新京报 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 张炎良摄 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 张炎良摄 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 张炎良摄 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 张炎良摄 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 张炎良摄 米歇尔携女儿亲友乘船游览颐和园。 中国青年网记者 李拓摄 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and