PhotoShp绘制可爱的卡通小熊的简单教程.doc

一，用路径画出选区 二，填充路径。 三，分层画出脸上各部位。 四，按住CRTY点图层一，反选删除多余的部份。 五，用同样的方法用路径勾出身体各部位，填充相应的颜色。 六，嘴巴是用路径勾出孤形，然后描边。 七，大体效果图出来了 八，选择耳朵白色的部位，删除。? 九，选择减淡工具，标出明明暗，立体感出来了！ 十，用模糊工具适当模糊脸上白色部位与上面的衔接处。 十一，选择鼻子中间部位，适当羽化一下，用减淡工具画出光感。 十二，选择鼻子上面白色图层，向右上角移一下，羽化1-2象素，转到头部的第一层，亮度调低一点（有很多方法，我说的只是一种，自己可以多尝试） 十三，因为是简单的卡通人物，整体用加深减淡画一下大体明暗就可以了，没必要太复杂 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurements determine the location points must ensure that the positioning is correct. (5) take level (level): level (minor works available in horizontal pipe), the two anchor points determine the horizontal position. Level according to use the drawings, first to become familiar with the drawin