新闻部工作规范流程流程 终稿.docVIP

华东理工大学 理学院新闻部工作规范及流程  简介： 新闻部是理学院分团委下属的一个职能性部门，主要是从院分团委的立场和视角出发，宣传理学院团学工作。 工作流程： 部门任务： ◇负责理院活动的宣传工作 理学院每年都会举办大量高质量的活动，例如新生风采大赛、科技嘉年华等，而新闻部的干事负责为这些活动摄影、写新闻稿。 管理整个团学联的人人和微博 ◇负责与校团学联的链接工作 信息预告、信息反馈 、舆情反馈 ◇负责开展本部门的优秀活动 摄影比赛、美图展示、出游摄影等系列活动。 组建记者团，采访优秀学长学姐及老师 部门分工： 1、新闻部成员由部长、副部长、摄影组、新闻稿组组成。 2、职责分工： 部长 向部门成员传达学院分团委指示 统筹新闻部内部管理工作，主持部门的全面工作 负责本部门与分团委学生会其他部门的沟通与交流 主持制定新闻的工作计划、发展规划和规章制度负责新闻管理工作 完成领导交办的其他任务 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, threads do not have to bend. Insulating part should be careful not to press i