游皓开题报告 弯机.docVIP

湖 北 理 工 学 院 毕 业 设 计（论 文） 开 题 报 告 数控折弯机液压同步控制方法的研究设计 姓 名： 游皓 系 别： 机电工程学院 专 业： 09械设计制造及其自动化 学 号： 201120110105 指导教师： 肖新华 完成日期：2013年3月22日 1、课题来源 研究目的和意义 3、国内外研究现状和发展趋势 4、本课题的主要研究内容及拟采取的技术路线、试验方案 5、预期达到的目标及进度安排 6、阅读的主要文献、资料 湖北理工学院 毕业设计（论文）开题报告 a special tool to measure half a point the rotor shaft runout and simultaneous measurement of two coupling flutter testing, it should meet the requirements. Install the coupling housings to ensure embedded rotor coupling within a concave shoulder, and rotor clearance meets the design requirements. 6.4, 6, wearing construction technology of generator rotors demonstration 6.4.6.1 construction preparation and conditions through the stator before loading check and confirm to confirm air tightness test of the stator and stator mechanical, electrical, instrumentation and control and other related work had been completed. Internal cleaning of stator, high power vacuum the surface of the stator. Stator and rotor magnetic Center drainage is complete. In conjunction with the quality, mechanical, electrical and other relevant persons to finally cleaning check the stator, which is clean and free of any debris. Worn rotors check and confirm confirm before loading the rotor air tightness test, electrical test work has been completed. In conjunction with the quality, mechanical, electrical and other relevant persons to finally clean the rotors checked, its interior is clean and free of any debris. By quality, mechanical, electrical and other professionals to conduct an examination of the rotor, confirm the wear condition of the rotor. Special equipment inspection and rotor through the preparation tool before loading inventory, check to confirm that it appears intact,