文丘里洗涤器本科毕业论文-刘付杰成.docVIP

本科生毕业 题目 文丘里洗涤器的实验研 及CFD模拟 学院名称 化学工程学院 专业名称 化学工程与工艺 学生姓名 刘付杰成 指导教师 曹睿副教授 起止时间：2016年3月1日至2016年6月10日 摘要 关键字：  Venturi scrubber experimental study and CFD simulation ABSTRACT The chemical industry to realize the sustainable development of our country , the development of chemical industry in China has experienced half a century and has formed a relatively complete categories, varieties in general and basic can meet the needs of the domestic chemical industry system. But what followed was a serious air pollution. In the process of industrial production will produce large amounts of dust flue gas, is one of the main factors that bring the atmosphere serious pollution, but at present the research about this aspect is less, This article is based on research that study?the structure parameters of influence _ venturi scrubber hydraulic performance, To explore?internal flow field of venturi scrubbers ? by CFD computational fluid dynamics software . In this paper, based on the import of pipe diameter of 50 mm venturi tube as the research object, carries on the single factor study . Combining experimental and CFD numerical simulation method to explore how different inlet flow rate, throat pipe length, expansion taper and other structure parameters effect on export section velocity, pressure distribution and the internal flow uniformity within the tube. The length of the chokes are provided 50mm, 75mm, 100mm venturi tube for single air and air - water two-phase experiments, meanwhile analyze the flow field on the experimental basis. For single phase air intake venturi tube is used to numerically simulate test and verify, comparing the results of numerical simulation results and experimental analysis ,and finally determine the air inflow，throat pipe length, expansion taper to ensure Venturi scrubber in a fine operation. Key Words：  目录 摘要 I ABSTRACT II 言 1 第1章 2 1.1 课题背景 2 2 1.1.2 煤化工加工流程 2 1.1.3 减少空气污染的措施 4 1.2 除尘 4 1.2.1 工艺除尘技术应用现状 4 1.2.2