XC6207替代方案.docVIP

特瑞仕以激光修整法及0.1V台的电压设定±1%的高精度技术为基础，提供优良的封装产品。特瑞仕的产品不光能对应封装形式的小型化，轻量化和薄型化的要求，而且可使客户更加自由地进行电路设计。这些小型封装产品因为可减少外接部品，所以应用领域正不断扩大。同时输出电流达到数安培的DC/DC转换器及产业用的中高电压领域的产品也正不断得到充实。 深圳市泰德兰电子有限公司是日本TOREX(特瑞仕)半导体在中国的授权一级代理商。 XC6207替代方案 电压调整器XC6207替代MAX8878EUK-美信 单路TOREX-XC6207 High Speed Green Operation LDO Voltage Regulators TOREX-XC6207 内容: The XC6207 series are precise, low noise, high speed, and low dropout regulators with green operation (GO) function. They are fabricated using Torex’s CMOS process. Performance features of the series include high ripple rejection and low dropout voltage, and the series include a reference voltage source, an error amplifier, a current limiter, and a phase compensation circuit. Output voltage is selectable in 0.05V increments within a range of 1.2V~5.0V, using laser trimming technologies. The series output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. GO provides high speed operation, low power consumption and high efficiencies by automatically switching between a high speed mode (HS) and a power save mode (PS) depending upon the load current level. The switching point of the GO to the output current is being fixed inside the IC. The IC operates when the GO pin is low-level. When only high-speed operation is required, it can be fixed by inputting a high level signal to the GO pin, thus providing operating conditions with the most suitable level of supply current for the application. The CE function enables the output to be turned off resulting in greatly reduced power consumption. In this state, with the XC6207B series, the IC turns on the internal switch located between the VOUT and VSS pins. This short enables the electric charge at the output capacitor (CL) to be discharged via the internal auto-discharge resistance, and as a result the VOUT pin quickly returns to the VSS level. The constant current limit circuit and the current limiters foldback circuit also operate as a short circuit protection for the