陶瓷材料在人假牙中的力学性能研究.docVIP

陶瓷材料在人假牙中的力学性能研究 专业：材料成型及控制工程 学 号： 学生： 指导老师： 摘要：目的：陶瓷材料是牙齿缺损修复中应用最广泛的材料之一，但陶瓷材料的脆性和低的强度限制了其临床应用范围及使用可靠性，本研究利用三维光学扫描仪和计算机三维设计软件对陶瓷假牙进行力学性能的分析，寻求提高其韧性和强度，推广陶瓷材料的临床应用范围。方法：采用氧化锆陶瓷材料，利用三维光学扫描仪对正常人第一磨牙进行数据采集，Geomagic Studio 11软件进行数据处理，计算机三维设计软件CATIA V5重构三维实体模型，Solidworks2010软件建立有限元分析模型，在此基础上分析陶瓷磨牙和树脂磨牙的力学性能。将分析结果进行对比，并与正常人下颌第一磨牙进行比较。结果：建立的模型可进行准确的力学分析，能有效的将氧化锆全瓷假牙与正常人磨牙及树脂假牙进行对比。结论：利用三维光学扫描仪和三维设计软件可以很好的分析陶瓷假牙的力学性能，为提高其强度和韧性提供了基础。 Mechanical properties study of ceramic materials from human’s denture Specialty: Material Forming and Controlling Engineering Student Number: 200910112202 Student: Yang Yao Supervisor: Dong Zhihong Abstact： Objective：Ceramic materials are one of the most widely used material for dental defect repairing，but brittleness and lower strength limit its application range and reliability in clinic.The research using three-dimensional optical scanner and computer 3D design software to analyze the mechanical properties of ceramic denture teeth，seeking to improve its toughness and strength and extending its clinical application of ceramic materials. Method：ZrO2 ceramic materialnormal people’s first molar by three-dimensional optical scanner and to manage data by Geomagic Studio 11 software and to reconsitutes 3D solid model by computer 3D design software CATIA V5. Solidworks2010 software built the finite element analysis model in order to analyze mechanical properties of ceramic molar and resin teeth. And by the simulation results，compared with first molarResult：The established model can accuratly analyze the mechanical properties，and can effectively compar ZrO2 all-ceramic teeth and normal human molars and resin denture. Conclusion：sing the 3D optical scanner and 3D design software can effectively analyze mechanical properties of ceramic denture teeth and provide the basis for improving the strength and toughness. Key Words: Ceramic material；3D optical scanner；Mechanical propert