My_Notes.docVIP

My_Notes Questions set interface 1/1 -speed 1000 -duplex FULL -flowControl RXTX -lacpMode DISABLED -throughput 0 set interface 1/2 -speed 1000 -duplex FULL -flowControl RXTX -lacpMode DISABLED -throughput 0 set interface 1/3 -speed 1000 -duplex FULL -flowControl RXTX -haMonitor OFF -lacpMode DISABLED -throughput 0 set interface 1/4 -speed 1000 -duplex FULL -flowControl RXTX -haMonitor OFF -lacpMode DISABLED -throughput 0 add channel LA/1 -ifnum 1/1 1/2 1/3 1/4 -Mode MANUAL -connDistr ENABLED -macdistr BOTH -speed 1000 -flowControl RXTX -haMonitor ON -trunk OFF -throughput 2998 why -lacpMode is DISABLED /etc/nsresolv.con nslookup not work // dig and host work ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ F5 b pool cal_trafficlim { monitor all udp (or tcp) member 7:1300 } b virtual cal_trafficlim { destination 36:1300 profiles udp pool cal_trafficlim } Destination Customer Reachable IP Address or DNS Name Service Port Number or Name if Well-known Service state enable bigstart list - display a list of all services, their description, whether they are set to start on system boot and whether they are in the default service group start and startup - start the specified service restart - restart the specified service stop and shutdown - stop the specified service status - display status information for the specified service memstat - display memory status information for the specified service AMOS: [root@scooter:Active] config # ssh sccp BusyBox v1.8.2 (2009-04-27 15:24:39 PDT) built-in shell (ash) Enter help for a list of built-in commands. Welcome to the F5 Networks AOM root@AOM1:~# less /var/log/messages ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ NetScale