X-Y工作台机械结构设计.docVIP

摘 要 数控技术，简称“数控”英文：Numerical Control（NC）。是指用数字、文字和符号组成的数字指令来实现一台或多台机械设备动作控制的技术。它所控制的通常是位置、角度、速度等机械量和与机械能量流向有关的开关量。数控的产生依赖于数据载体和二进制形式数据运算的出现。　机电一体化技术是微电子技术、计算机技术、信息技术与机械技术相结合的综合性高新技术，是机械技术与微电子技术的有机结合。随着计算机技术的迅猛发展和广泛应用，机电一体化技术获得前所未有的发展，成为一门综合计算机与信息技术、自动控制技术、传感检测技术、伺服传动技术和机械技术等交叉的系统技术关键词： Abstract Numerical control technology, referred to as NC. English: Numerical Control (NC). Refers to numbers, words and symbols the number of instructions to implement one or more mechanical equipment motor control technology. Usually its control position, angle, speed and other machinery and mechanical energy flow volume and the volume switch. NC data generation depends on the binary form of data carriers and the emergence of computing. CNC technology is the modern industrial automation, flexibility, integrated production is based on a knowledge-intensive, capital-intensive modern manufacturing technology, is the national focus on the development of cutting-edge technology.  Mechatronics is the microelectronics, computer technology, information technology and mechanical technology combined with the integrated high technology, mechanical technology and combination of microelectronic technology. With the rapid development of computer technology and extensive application of mechatronics achieve great development and become an integrated computer and information technology, control technology, sensor detection, servo drive technology and mechanical technology, cross-system technology.  CNC XY table is an important part of numerical control technology, which make full use of the PLC hardware and software features to achieve the machines control extended to the processing machine, machining accuracy is improved.  CNC technology used in table has the following advantages: 1.to ensure a certain accuracy, size and good consistency 2.to further improve reliability. 3. low labor intensity 4.adaptable, economic benefit is obvious 5.good working environment  Thi