注塑-茶杯盖注射模设计与制造-说明书.docVIP

摘要 模具工业是国民经济的基础工业，而塑料模具又是整个模具行业的霸主。我国的塑料成型模具设计，制作技术比较晚，整体水平还比较低，但近几年发展比较迅速。目前单单型腔的模具达80%以上，仍占主导地位。该设计通过对多种相似塑件的模具结构参考，设计的是聚乙烯塑件（某型口杯盖），采用的是一模两腔注射。该产品采用点浇口注射，和整体式型腔设置。型腔是由两瓣合模构成，利用斜导柱侧向分型，塑件的螺纹采用强制脱模。 关键词：杯盖；注射模；瓣合模；侧向分型；设计； ABSTRACT The mold industry is the national economical foundation,and the plastic mold also is the overlord in the entire mold industry. It is quite late which the development of manufacture technology, the overall level is low in our country.But the plastic mold is developing quite rapidly in plastic take- shape mold design area recent year.Now, the single cavity mold is above 80%,and still occupied an important position.By researching many kinds of similarly models, I designed a polyethylene model, which can inject two cavities in one time.The products are pinpoint gated on the side,and adopt integral cavity arrangement.The cavity is formed by two petal mold modules, and side core-pulling is through angle pin. the thread is through forced ejection. Key words: cup lid；injection mold；petal mold module；side core-pulling；design； 目 录 1 绪论-------------------------------------------------------------------------------------------------------------------1 1.1塑料工业简介-----------------------------------------------------------------------------------------------1 1.2 我国塑料模现状--------------------------------------------------------------------------------------------2 1.3 塑料模发展趋势--------------------------------------------------------------------------------------------2 2 塑件工艺性分析--------------------------------------------------------------------------------------------3 2.1制品(茶杯盖)的简介-------------------------------------------------------------------------------------3 2.2制品的工艺性及结构分析---------------------------------------------------------------------------------3 3 注射模的结构设计------------------------------------------------------------------------------------------5 3.1确定型腔数量及排列方式------------------------------------------------------