2014国内自主技术方案.docVIP

大连华锐重工推进器有限公司 Dalian Huarui Heavy Industry propeller Co.,Ltd 180000吨散货船 船用螺旋桨 180000DWT BULK CARRIER PROPELLER 技 术 方 案 DADE/日期 Data provided by buyer --------------------------4 供货范围/ Scope of supply/--------------------------------------------5 螺旋桨和桨帽制造工艺要求------------------------------------------6 Manufacturing process requirements for propeller and propeller cap 其它/ Miscellaneous-----------------------------------------------------7 6.1工厂验收和客户验收/ Shop test and fat ------------------------7 6.2质保/ Guarantee -----------------------------------------------------7 工具/ Tools ---------------------------------------------------------------7 包装/ Packing ------------------------------------------------------------7 9. 周期/ lead-time-----------------------------------------------------------7 1. 总则 / General 青岛北海船舶重工有限公司（以下简称买方）委托大连华锐重工推进器有限公司（以下简称卖方）提供180000吨 散货船螺旋桨及桨帽。 Dalian Huarui Heavy Industry propeller Co.,Ltd (hereinafter referred to as seller) is authorized by YANGFAN GROUP CO.,LTD. (hereinafter referred to as buyer) to provide propeller and cap for180000 dwt bulk carrier. 2. 买方技术要求 / Technical Requirements 项目： 180000吨 散货船 Project : 180000DWT Bulk Carrier 船号： Hull Number 船级社： Class : 旗帜： Flag : 主发动机： Main Engine SMCR（选定的最大功率）： CSR（持续运转功率）： 螺旋桨 / Propeller： 提供定距、无键、右旋转、倾斜桨叶螺旋桨 Fixed type keyless right-handed propeller with skew back blades to be provided. 直径： Diameter: 桨叶数：4 Number of blades: 4 材质：定距桨：镍-铝-铜 Materials: Fixed propeller: Ni-Al-Bronze 转速和直径按照主机布局点和最小油耗最优化进行调整。 RPM and diameter to be adjusted according to main engine layout point and optimised for minimal fuel oil consumption. 螺旋桨为正常海面情况5%轻载运转设计。 The propeller is to be designed for 5% light running under normal sea conditions. 气穴性能和船体压力脉动由船模试验来验证，其结果由螺旋桨设计师评估。 Cavitation performance and hull pressure pulses to be verified by tanktest and results to be evaluated by propeller designer. 3. 买方提供的资料/ DOCUMENTATION 3．1螺旋桨设计需用资料/ Data requirements 船