Plate stee binding requirements.docVIP

Plate steel binding requirements Short slab reinforcement assembling to the next, to in the long, on the lower level is the same. Beam and plate intersect with yi, anchor into the beam slab length meet the minimum anchorage length. 6.2.1.4.7.3.1 reinforced connector location Column within the channel length are not allowed to overlap, structure of plate steel joints as far as possible to avoid loading parts, at 50% of the same cross section stagger when necessary. 6.2.1.4.7.3.2 reinforced positioning approach Along the channel direction set floor h steel horse stool, spacing is 2000 mm,