SYD-201E数显沥青针入度仪.docVIP

SYD-2801E针入度试验器 GLMGS 2002年06月06日 一、产品简介 One, product introduction SYD-2801E针入度试验器是根据中华人民共和国标准GB/T 4509 《石油沥青针入度测定法》、中华人民共和国交通行业标准JTJ052-2000《公路工程沥青及沥青混合料试验规程》中的T0604《沥青针入度试验》中的技术要求和有关规定设计制造的。 SYD-2801E penetration tester is according to the peoples Republic of China standard GB / T 4509 petroleum bitumen determination of penetration, the peoples Republic of China transportation industry standard JTJ052-2000 highway engineering asphalt and asphalt mixture test procedures in the T0604 asphalt penetration test of the relevant provisions of the technical requirements and the design and manufacture of the. 本仪器主要适用于测定道路石油沥青、改性沥青针入度以及液体石油沥青或乳化沥青蒸发后残留物的针入度。本仪器也可用于固体细粒、粉剂、胶体、冻体等材料，以及乳酪、糖胶、牛油、麦其淋、奶油、发酵体等食品原料检验，在食品工业、交通公路工程及其他工业部门都可广泛应用。 The instrument is mainly applicable to the determination of road asphalt, modified asphalt the penetration and liquid petroleum bitumen or asphalt emulsion residue after evaporation penetration. The apparatus can also be used for solid particles, powder, colloidal, jelly and other materials, as well as the cheese, sugar, butter, cream, butter, fermented wheat somatic foods such as raw materials inspection, in the food industry, highway traffic engineering and other industries are widely used. 二、技术指标 Two, technical indicators ★测量范围：0～600针入度； Of measuring range: 0 ~ 600 penetration; ★分辨率：0.01㎜； Resolution: 0.01 mm; ★针入时控：可分别选择5秒或60秒，时间误差小于±0.1秒。 Of needle into the time control: can respectively select 5 or 60 seconds, time error is less than 0.1 seconds. ★加热器功率：200W； Heater power: 200W; ★控温精度：25±0.1℃（注：环境温度应不高于20℃）； In the temperature control precision: 25 + / - 0.1 DEG C ( Note: the ambient temperature is not higher than 20 DEG C ); ★控温方式：高精度数字温控仪； In the way of control: high precision digital temperature controller; ★恒温浴：为硬质玻璃缸，浴液； In the constant temperature bath: hard glass cylinder, bath; ★搅拌：磁力搅拌珠自动搅拌； Mixing: of magnetic stirring bead automatic stirring; ★标准针：2.5±0.05g, 符合GB/T4509、T0604的规格要求； Of standard needle: 2.5 + 0.05g, with