51单片机的液晶显示温度计程序.doc

51单片机的液晶显示温度计程序 #include reg51.h #include intrins.h sbit RST = P2^0; sbit CLK = P2^1; sbit DQ = P2^2; sbit TSOR = P2^3; sbit ALERT =P2^4; sbit RS = P2^7; sbit RW = P2^6; sbit EN = P2^5; /*------------------------------------------全局变量-------------------------------------------------------*/ static unsigned char temp1,temp2; //温度值的整数部分、小数部分 static unsigned char pos,posset; //数字电位器电位值、设定值 static unsigned char min,sec; //分钟、秒 static unsigned char count; //Timer0中断计数 static unsigned char minset; //设定的分钟数 static unsigned char status1,status2; //状态标志 bit stop,timeover; //定时停止、结束 static char line0[] = 00:00 ; static char line1[] = . C W; /*-------------------------------------------------------------------------------------------------------------*/ void InitInterupt(); void KeyboardDelay(); /*-------------------------------------------LCD驱动函数------------------------------------------------*/ void DelayL(); void DelayS(); void WriteCommand(unsigned char c); void WriteData(unsigned char c); void ShowChar(unsigned char pos,unsigned char c); void ShowString(unsigned char line,char *ptr); void InitLcd(); /*----------------------------------------------键盘-程序--------------------------------------------------*/ unsigned char GetKey(); /*---------------------------------------------数字温度计驱动-------------------------------------------*/ void ChangePos(bit sel,unsigned char pos1,unsigned char pos2); /*------------------------------------------温度传感器驱动----------------------------------------------*/ void Delay15(); void Delay60(); void Delay100ms(); void Write0TS(); void Write1TS(); bit ReadTS(); void ResetTS(); void WriteByteTS(unsigned char byte); unsigned char ReadByteTS(); void InitTS(); void GetTempTS(); /*----------