《剪切机电气传动系统设计毕业设计(论文)》.docVIP

剪切机电气传动系统设计 摘要 定长剪切控制系统是工业生产应用中常见的应用系统，而定长切割作为电气生产线所必需的一道工序，其自动化和切割精度对整条电气生产线的产品产量和成品质量以及原料的利用率大小都起着至关重要的作用。该设计主要从PLC控制时间，变频器定长调速的角度对剪切机电气传动系统进行了一系列的应用讨论。其中以变频器定长调速为主，PLC控制为辅。而变频器则选用了阿尔法6000定长变频器。对变频器的使用方式与参数设定进行了详细的讨论，而对于电机电池的选用也有着一定的讨论。并且对电气传送系统各个部分都有一定的简述。该系统主要运用了PLC、传感器、继电器、变频器等器件，利用阿尔法6000自带的定长系统的自动控制性能，实现流水线传送带传送过程的无人控制。最主要的是，可以通过设定电机切刀切割频率设定长度，达到精确剪切的处理。随着时代的进步，科学的发展，我所讨论的内容还仅仅只是沧海一粟。而研究方式的掌握才是该论文作后所为达到的目的。 关键词:PLC;阿尔法6000变频器;电机;变频传动 Electrical transport system for shearing machine Abstract Fixed length cutting control system is common in industrial application application system, and fixed length cutting electrical production line as a necessary procedure, the automation and the cutting precision of the entire electrical production line product yield and product quality and raw material using rate of size plays a crucial role. This design mainly from the PLC control time, the speed of the converter set the angle of the speed of the shear machine electric drive system for a series of application discussion. Which with the speed of constant frequency converter, PLC control as a supplement. The inverter then chose Alpha 6000 constant frequency converter. The usage of inverter and the parameter setting are discussed in detail, and the selection of motor battery is also discussed.. And it has some brief introduction to each part of the electric transport system.. The system mainly uses the PLC, sensors, relays, inverter and other devices, the use of alpha 6000 comes with fixed length system automatic control performance, so as to realize the assembly line conveyor belt transmission process of unmanned control. The main one is that the length of the cutting frequency can be set by setting the cutting frequency of the motor, and the processing of the precise shear is achieved.. With the progress of the times, the development of science, I discussed the content is just a drop in the bucket. And the research method is the master of the paper for