紧固件中英文照表(Terminology for fastener).doc

非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert) 六角开槽螺母 Hexagon slotted nuts 六角开槽螺母 细牙 Hexagon slotted and castle nuts-Fine pitch thread 六角螺母 Hexagon nuts 六角螺母－细牙 Hexagon nuts-Fine pitch thread 全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts 120度半沉头铆钉 120degree oval countersunk rivets 120度沉头半空心铆钉 120 degree countersunk head semi-tubular rivets 120度沉头铆钉 120 degree countersunk head rivets T形槽用螺栓 Bolts for T-Slot 鞍形弹簧垫圈 Curved single coil spring lock washers 鞍形弹性垫圈 Curved spring washers 半圆头带榫螺栓 Cup head nib bolts 半圆头低方颈螺栓 Cup square neck bolts with short neck 半圆头方颈螺栓 Cup head square neck bolts 半圆头铆钉 Round head rivets 扁平头铆钉 Thin head rivets 扁圆头半空心铆钉 Oval head semi-tubular rivets 扁圆头铆钉 Flat round head rivets 标牌铆钉 Rivets for name plate 标准型弹簧垫圈 Single coil spring lock washers, Normal type 波形弹簧垫圈 Wave single coil spring lock washers 波形弹性垫圈 Wave spring washers 槽钢用方斜垫圈 Square taper washers for slot section 槽销 Grooved pins 侧面带孔圆螺母 Round nuts with set pin holes in side 沉头半空心铆钉 Countersunk head semi-tublar rivets 沉头带榫螺栓 Flat countersunk nib bolts 沉头方颈螺栓 Flat countersunk square neck bolts 沉头铆钉 Countersunk head rivets 沉头双榫螺栓 Flat countersunk double nib bolts 大半圆头带榫螺栓 Cup head nib bolts with large head 大半圆头方颈螺栓 Cup head square neck bolts with large head 大扁圆头半空心铆钉 Truss head semi-tubuar rivets 大扁圆头铆钉 Truss head rivets 带槽圆螺母 Slotted round nuts 带孔销 Pins with split pin hole 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip 单耳止动垫圈 Tab washers with log tab 弹性圆柱销 Spring-type straight pins-Slotted 等长双头螺柱 Double end studs 地脚螺栓 Eyelet bolts 吊环螺钉 Eyebolts 蝶形螺母 Wing nuts 端面带孔圆螺母 Round nuts with drilled holes in one face 方螺母 Square nuts 方头凹端紧定螺钉 Square set screws with cup point 方头长圆柱端紧定螺钉 Square set screws with long dog point 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end 方头倒角端紧定螺钉 Square set screws with chamfered end 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange (w