电子产品作业——密码锁.docxVIP

电子产品设计课程学院：_____________________班级：_____________________姓名：_____________________学号：_____________________指导教师：_____________________课题名称：_____________________________课题概述（手写）：器件清单（手写）：器件名称规格数量备注电路原理图（proteus截图）：电路仿真图（proteus截图）：设计流程图（手绘）：程序源代码：#includereg52.h#define uint unsignedint#define uchar unsigned charsbitke_sig=P3^0; // LEDsbitrs=P1^0;// LCDsbitrw=P1^1;sbit en=P1^2;sbit led=P2^0;sbit SPK=P2^1;uchar wad=5;ucharct=0;uchar rat=0;uchar rig=0;uchar sig=1;uchar lcd_str0[]=Input password:;uchar lcd_str1[]=Failed!!;uchar lcd_str2[]=Opened!;uchar lcd_str3[]=Latch...;ucharpr_word[]={1,2,3,4,5,6};void delay( uint y) {uchar xx=110;for(;y0;y --)for(;xx0;xx --); }void ring( void ) {uchari,j;while(1) {for(i=0;i255;i++) { SPK=~SPK;for(j=0;j110;j++); }for(i=0;i255;i++) { SPK=~SPK;for(j=0;j150;j++); } } } ucharkey_board( void ) {ucharke_vl;while(ke_sig==0);delay( 5 );ke_vl=P2;while(ke_sig!=0);ke_vl=(ke_vl 0xf0) 4;switch(ke_vl) {case 0x0f: ke_vl=1;break;case 0x07: ke_vl=2;break;case 0x0b: ke_vl=3;break;case 0x0d: ke_vl=4;break;case 0x05: ke_vl=5;break;case 0x09: ke_vl=6;break;case 0x0e: ke_vl=7;break;case 0x06: ke_vl=8;break;case 0x0a: ke_vl=9;break;case 0x04: ke_vl=0;break;case 0x00: ke_vl=11;break;case 0x08: ke_vl=12;break;}return ke_vl; }void busy(void) {ucharbwt=0x00;rs=0,rw=1,en=1;while((bwt0x80)==0x00) { P0=0xff;en=0;bwt=P0;en=1;} }voidw_byte( uchari,uchardat) {busy();rs=i,rw=0,en=1; P0=dat;delay( 5 );en=0;delay( 5 );en=1;}voidw_date( ucharx,uchary,uchar *p,uchar log ) {uchar t=0;x=0x01;y=0x0f;if( x==0x01 ) {w_byte(0,0x80+0x40+y); }elsew_byte(0,0x80+y);while( log -- ) {w_byte(1,p[t ++]);} }voidlcd_init( ) {w_byte(0,0x38);w_byte(0,0x0c);w_byte(0,0x06);w_byte(0,0x01);delay( 4 );w_byte(0,0x80);w_date( 0,0,lcd_str0,15 ); }voidred_word(uchar word ) {if((word!=11)(word!=12)(ct!=6)) { w_byte(0,0x80+0x40+wad);w_byte(1,*);if( word!=pr_word[rat ++] )sig=0;wad++;ct++; }if( word==11 ) {if((sig==1) (ct==6)) {w_date( 1,5,lcd_str2,7 );led=~led;delay(30000);led=~led;delay(10000);le