微波工程期中報告-論文研讀報告.pptVIP

* 微波工程期末報告-論文研讀報告 主題: Waveguide Dielectric Permittivity Measurement Technique Based on Resonant FSS Filters 報告人: 四技網通四乙 羅冠閔 IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, VOL. 21, NO. 5, MAY 2011 Southern Taiwan University Department of Electronic Engineering * Abstract 本論文提出一個方法來測定材料的介電係數。這種方法利用了低成本的優勢讓頻率來選擇結構(FSS），將波導橫向放置在測樣品旁。放置在靠近的FSS場額外的介質導致帶通和帶阻的共振頻率的頻飄。經過測試來決定未知介電質係數，其關係來自於頻飄和介電質系數之間。這樣的程序，尤其適用於測量介質薄板坯介電常數。 * Index Terms 頻率選擇表面 Frequency selective surfaces (FSSs) 介質諧振測量技術 resonant dielectric measurement technique 波導濾波器 waveguide filter * INTRODUCTION THE MEASUREMENT of dielectric permittivity of materials is a key task in microwave engineering for the wide number of applications. A broad variety of measurement techniques has been proposed in the past [1]–[8]. Generally, the choice of a method depends on the kind of material and characterization. The transmission/reflection methods are commonly employed for a wideband characterization of unknown materials [2]–[5]. Such techniques require the measurement of transmission and reflection coefficients for a section of waveguide or coaxial line filled with a sample of the material under test. * FSS DESIGN 該方法是根據典型的共振透射峰或反射剖面的FSS。為了估計都真實與虛構部分的電介質介電常數，參考濾波器的設計是一通帶函授的頻率上限所採用波導。該金融監督院，設計了一種低虧損支持介質基板既獲得強勁的機械安裝，維護深共振峰在同一時間。通過該過濾器的設計一個有效週期矩量法（PMoM）求解。該矩量法分析波導內通過模擬執行自由空間週期對應作為結果的事實基本模式的矩形波導可解釋為對在一個平面波斜入射反彈波導側壁之間。 * MEASUREMENT METHODOLOGY 該技術的目的是決定未知的介電質的介電常數任意增加厚度空間印FSS的一側。該過程可以概括在下面的步驟。 1.傳輸/反射卸載響應濾波器初步確定是共振峰 2.額外的介質是放置在靠近FSS的測量因此， 新的頻率響應和轉移諧振峰值 3. * Fig. 1 Fig.1. Shift-permittivity map: unknown dielectric permittivity as a function ofthe frequency shift of the resonant peak. * Fig. 2 Fig. 2. Transmission loss at the resonance as a function of the tangent loss of a material with a dielectric permittivity of 4. * Fig. 3 Fig. 3. Photograph of the experimental setup used to test the method for computing the dielectric permittivity. EXPERIMENTAL VALIDATIO