Read e.docVIP

Read me 1. Notes 2. Changes 3. Virus scan results / checksums 4. Arguments 5. Extra ########################################################################## # 1 - Notes ########################################################################## Do you have the WAT update installed, KB971033? If yes you may have got flagged as non-genuine, in order to become genuine again just do the following. * Launch the loader application and select to uninstall * Restart the PC * Install the loader and restart the PC * Visit the following website to revalidate Windows: /genuine/ (You may need to set IE to compatibility mode!) #### Is Windows failing to boot after you installed the loader? Just do the following. * Boot up the PC from your Windows installation disk * Select the Repair your computer option * Select Command Prompt * Input bootsect.exe /nt60 SYS /force (without quotes) * Restart the PC Note: If the above doesnt fix your boot issue then use the command bootsect.exe /nt60 ALL /force instead. Just make sure you remove all USB flash drives before you use the command. #### If you have previously used another activation solution and have been marked as non-genuine then you first need to uninstall the software you used or just format and start fresh. #### Q. I received the error message Error finding your systems active partition, what do I have to do? A. You need to format the whole hard drive with a program like Active@ Kill Disk. This issue is caused by your locked OEM partition. /boot-cd-iso.zip Q. I received the error message Failed to add loader to the boot code, what do I have to do? A. Disable any system protection. Some types of software block the loader application from installing to the boot code. Q. Ive used a version of the loader before and it failed to work, what do I have to do? A. If you previously used bootsect to get back into Windows then you first need to press uninstall, reboot and then install the newest version of the loader. Q. Why was tab