smokeping 主从模式常见问v题.docxVIP

smokeping 主从模式常见问题从节点部署从节点的部署很简单，跟主节点一样，不同的是，从节点不需要配置conf文件，它是直接从Master上获取conf文件再获取自己需要的信息主/从 做分布式监控的时候有几点需要注意1.主从服务器上面的密码文件权限必须为600而且主服务器上面的密码文件的属主必须为apache的启动用户2.从服务器上面的密码文件只需要一个密码就行，也就是主上面为它配置的那个密码。同样从服务器上面的密码文件的属主必须为smokeping的启动用户启动Slave/usr/local/smokeping/bin/smokeping--master-url=http:// 3/smokeping/smokeping.cgi --cache-dir=/usr/local/smokeping/cache--shared-secret=/usr/local/smokeping/etc/smokeping_secrets.dist--slave-name=shenzhen--shared-secret=/opt/smokeping/etc/secrets.txt --debug-daemon --logfile=/tmp/smokeping.log主/从分布式监控常见问题及解决办法。Slave启动的时候报错。Q1.WARNING: Opening secrets file /usr/local/etc/smokeping/slavesecrets.conf: Permission deniedERROR: we did not get config from the master. Maybe we are not configured as a slave for any of the targets on the master ?A:在master上面 对slavesecrets.conf文件 执行如下命令：chown smokeping slavesecrets.confQ2: WARNING: Data from ShenZhen was signed with 58e8b1b17440aa40fac67161b8c7a328 which does not match our expectationERROR: we did not get config from the master. Maybe we are not configured as a slave for any of the targets on the master ?A:这个错误就是本地的密码文件配置错误，本地密码文件只保存master上面配置你这台slave的密码，只需要一个密码就可以了Q3: WARNING: No secret found for slave shenzhenERROR: we did not get config from the master. Maybe we are not configured as a slave for any of the targets on the master ?A:在master上面的密码文件里加上shenzhen及对应的密码就可以了。Q4: WARNING: I dont know the slave shenzhen ignoring itERROR: we did not get config from the master. Maybe we are not configured as a slave for any of the targets on the master ?A:这个是指在config文件里面没有定义shenzhen这个从服务器Q5:ERROR: the shared secret file (/usr/local/smokeping/etc/smokeping_secrets.dist) is world-readable or writable at /usr/local/smokeping/lib/Smokeping.pm line 4054.A:这是由于secrets的权限其他用户可读造成的，执行 chmod 400 /usr/local/smokeping/etc/smokeping_secrets.dist或，chmod 600 /usr/local/smokeping/etc/smokeping_secrets.distQ6:WARNING: I expected protocol 2 and got ? from slave slave1. I will skip this.ERROR: we did not get config form