命名访问控列表ACL添加删除规则.docVIP

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
outerenable 用户模式 Router#configure terminal 特权模式 Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface FastEthernet0/0 进入接口模式 Router(config-if)#ip address 192.168.1.1 255.255.255.0 为f0/0分配iP地址 Router(config-if)#no shutdown 激活端口 Router(config-if)# %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-if)#exit 退出接口f0/0 Router(config)#interface FastEthernet0/1 Router(config-if)#ip address 192.168.2.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)# %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up Router(config-if)# Router(config-if)# Router(config-if)#exit Router(config)#ip ac Router(config)#ip access-list ? extended Extended Access List standard Standard Access List Router(config)#ip access-list s Router(config)#ip access-list standard renshibu 创建命名的访问控制列表 Router(config-std-nacl)#deny host 192.168.1.2 创建规则拒绝目标主机 Router(config-std-nacl)# %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up Router(config-std-nacl)# Router(config-std-nacl)# Router(config-std-nacl)# Router(config-std-nacl)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console Router#show ac Router#show access-lists 查看访问控制列表 Standard IP access list renshibu 10 deny host 192.168.1.2 Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#ip ac Router(config)#ip access-list a Router(config)#ip access-list s Router(config)#ip access-list standard % Incomplete command. Router(config)#ip access-lis

文档评论(0)

wt60063 + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档