EGPRS_参数导论.ppt

EGPRS参数 BTS级参数_基本参数 EQ Plan 255 0-255 RAC Routing Area Code BTS EB Plan 0...65535 NSEI Network Service Entity Identifier BTS EQ Plan 0 0-2 TRP TRX priority in TCH allocation BTS EQ Plan N Y/N BFG Prefer BCCH Frequency GPRS BTS EQ 100% 100% 1-100% CMAX MAX GPRS CAPACITY BTS EQ Y N Y/N EGENA EGPRS Enabled BTS EQ Y N Y/N GENA GPRS Enable BTS EQ Plan 1% 0-100% CDEF Default GPRS Capacity BTS EQ Plan 0 0-100% CDED Dedicated GPRS Capacity BTS MML Recommended Default Range Abbreviate EXPLANATION Domain BTS级参数_基本参数 设置及影响： CS业务的优先级要高于PS业务，所以CDEF和GTRX设置的多或少对CS业务来说是不会带来资源冲击的。但是如果CDEF设置的过少，会带来一些不必要的GPRS Upgrade Request请求，即给PCU带来一些不必要的信令开销 CDEF设置过多，会耗费较多的PCU资源 根据多天多时段的KPI---ava_16a（平均PS域的时隙数）的结果来优化EGPRS无线时隙资源，对于那些平均PS域的时隙数大于现网CDEF设置时隙数的，将取CDEF值为该小区实际平均PS域的时隙数，这样可以减少不必要的(E)GPRS Upgrade次数 设置EGPRS=Y前，GPRS需要设置成Y CMAX值必须大于等于CDEF的值 BTS级参数_上行链路功控参数 设置及影响： GAMMA参数设置低一点，有助于减小上行BLER EU 18，28 34 0-62dB GAMMA Binary Representation TAU BTS EU 7，10 7 0-10 ALPHA Binary Representation ALPHA BTS MML Recommended Default Range Abbreviate EXPLANATION Domain BTS级参数_链路自适应参数 EQ 2 2 0: link adaptation is disabled, 1:link adaptation is enabled for RLC acknowledged mode, 2:link adaptation is enabled for both RLC acknowledged and RLC unacknowledged modes ELA EGPRS LINK ADAPTATION ENABLED BTS EU 10 10 1,2,3,4,5,7,10,12,15,20,25 BEP Bit Error Probability filter averaging period BTS EQ 10 0 –31 to 31 MBG MEAN BEP OFFSET GMSK BTS EQ 10 0 –31 to 31 MBP MEAN BEP OFFSET 8PSK BTS EQ 10% 10% 1-100% BLU MAXIMUM BLER IN UNACKNOWLEDGED MODE BTS EQ 90% 90% 10-100% BLA MAXIMUM BLER IN ACKNOWLEDGED MODE BTS EQ 6 5 1 to 9 MCU INITIAL MCS FOR UNACKNOWLEDGED MODE BTS EQ 9 6 1 to 9 MCA INITIAL MCS FOR ACKNOWLEDGED MODE BTS MML Recommend Default Range Abbreviate EXPLANATION Domain BTS级参数_链路自适应参数 设置及影响： 如果无线信号载干比C/I良好，初始确认模式MCS方式MCA可以设置成9 如果无线信号载干比C/I良好，初始不确认模式MC