《橡胶成形件自动修剪机夹具及传动部分的设计-中英文-正文》.doc

橡胶成形件自动修剪机夹具及传动部分的设计 摘要：随着橡胶密封圈的大批量生产，对橡胶成形件自动修剪机的需求也跟着扩大。因而对加工效率提出很高的要求，全自动橡胶修剪机就是为满足市场需求而设计的。本课题是橡胶成形件自动修剪机夹具及传动部分的设计，包括机械手的设计，自动上料、下料机构设计，自动切削部分设计。在夹具部分设计中，分析了两种方案，一种是采用机械夹紧方法，另一种是采用气体负压夹紧。考虑多种因素采用了气体负压夹紧。夹具设计合理，精度合适。在传动部分，传动方式采用了带传动，方案结构简单，成本低。在机械手的设计过程中分析到机械手末端两种方式，采用了一个气爪一个电磁铁的方案。在传感器的设计部分中，采用了光电传感器和电磁式传感器。本课题设计的夹具及传动部分，方案合理，结构紧凑。完成了自动修剪机夹具及传动部分设计指标要求。设计的机器能够完成切削范围：?20—?50，切削效率：15-20个/分钟。这种橡胶成形件自动修剪机的大量生产，能够提高加工效率，增加利润。 关键词：密封圈；修剪机；夹具；传动The jig and transmission part designs of rubber forming automatical trimmer machine Abstract：With the mass production of rubber lock ring,the demands of rubber forming automatic trimmer is growing rapidly. High requests are proposed to the processing efficiency , the automatic rubber forming trimmer is designed to satisfy the demands of the market. This topic is about the design of the jig and the transmission part of rubber forming automatic trimmer including the design of mechanic hands, the automatic material loading and discharging parts and design of automatic cutting parts, In the design of jig part,two kind of plans has been analyzed , one is mechanic clamping, the other kind is gas negative pressure clamping . The design of the jig is reasonable, the precision is appropriate. In the transmission part, the belt transmission is adopted ,the structure is simple, the cost is low. The terminal two ways in mechanic hands design process is analyed, a gas fingernail electro-magnet plan is adopted. In the part of sensor design, the electro-optical sensor and the electro-magnetic sensor are adopted. The design of jig and the transmission part is reasonable,the structure is compact. the design target t of the jig and the transmission part of automatic trimmer is attained The machine designed can satisfy the cutting scope: ?20-?50, cutting efficiency: 15-20/Minute, Once this kind of rubber forming automatic cropper is massly produced, it can enhance the processing efficiency of enterprise and the enterprise profit is increased