《毕业设计(论文)红外线电子进出门计数器设计说明书》.doc

河南科技学院 20届本科毕业论文（设计）论文题目：学生姓名： 所在院系： 机电学院 所学专业： 导师姓名： 完成时间：20年月 要 本文利用红外线发射、接受模块作计数传感器基于光电检测原理，设计了红外线电子计数器。对于乘客的进出门计数更方便快捷。由于该装置使用了模块化结构及加密、解码技术，解决了抗干扰问题。故工作稳定计数准确。可广泛用于汽车等记录进出门人数的设备。 关键词：LED 可逆计数器 红外线传感器 红外线发射驱动器Abstract Using the infrared emission, accept module for counting sensor based on the photoelectric detection principle, design of infrared electronic counters. For the passengers into out count more convenient and quick. Because the device using modular structure and encryption, decoding, solve the technical problem. Anti-interference So stable count accurately. Can be widely used in automobiles record into the number of devices. Key words: LED，Reversible counter，Infrared sensors，Infrared emission drive目 录 1引言........................................................................... ................... .... .............. ..........1 1.1课题的来源和意义.......................................................................................... 1 1.2 国内外“电子售票员”现状.................................................................. ........ 1 1.3方案论证.......................................................................................................... 1 1.4设计制作工作步骤.......................................................................................... 2 2.计数器设计........................................................ ............ ........... ...............................3 2.1 总体设计要求.................................................................................... ........ ...3 2.2乘客进出门统计.............................................................................................. 4 2.3 5KHZ 红外发射驱动器..................................................................................6 2.4 5KHZ带通滤波器.......................................................................................... 7 2.5可逆计数器...................................................................................................... 9 2.6译码显示电路.............................