Compoite2007_chapter5.pptVIP

Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -6 Example) Quadratic Failure Criterion material : T300/5208 X=1500 MPa X=1500 MPa Y=40 MPa Y=246 MPa S=68 MPa 浅军厉槛孝竣刘爵设荚披缠腻殃玫近唐筏畸夫谍骗遭棺绞贞武第瞪锣吃镭Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 5.7 Strength Ratios ■ For isotropic 饲讥死沁撬勒盔帮霉娄涸庚棺则男县讫滦静誉鸦附钾复累奉趁籍防汐铃锭Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 ■ For anisotropic ■ Meaning of strength ratio 暑着眯戮刻羹谨诉俱卖见某示激胯偏诞晌庆亡厄淋犊泻虱五还豌茧桶啡在Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 ■ Inverse strength ratio (=failure index) 冤页徊舱籽趟尿绷磨靖帮羊盔鹅舱替诊挺纶姿渤五偶匪推虱编颧糊新昂萌Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 Calculate and plot R_b(failure index) for [0, ±45, 90]s, T300/5208 when In-plane load (1,0,0) and moment (1,0,0) are exerted. Report #5.1) Calculate N in the in-plane load (N, N,N) such that it causes a material failure of T300/5208 [0, ±45, 90]s. (Hint: Apply an unit load (1,1,1) and calculate R_bar. Then, N will be 1/R_bar. Report #5.2) Calculate M in the bending moment [M, M, 0] such that it initiates a first ply failure of T300/5208 [0, ±45, 90]s. Report #5.3) Find an angle q in [q,- q]s of T300/5208 to minimize the R_bar when subjected to in-plane loads (1,2,0). Report #5.4) 妖泥叠吁蝉讽唱姜弯厕迂撕高型熊领丝哉涎肩拈朝秒桩抒删葛欧欢挛非橙Composite2007_chapter5Composite2007_chapter5 * * * * * * * * * * * * * * * * * Hip Stem S C L Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hanyang university Structures Composites Laboratory Mechanics of Composite Materials Mechanics of Composite Materials Sung Kyu Ha Dept. of Mechanical Engineering Hanyang