ccna 4.docVIP

 Close Window  Assessment System Exam Viewer - EWAN Practice Final Exam - CCNA Exploration: Accessing the WAN (Version 4.0) Below you will find the assessment items as presented on the exam as well as the scoring rules associated with the item. Cisco Networking Academy content is copyrighted and the unauthorized posting, distribution or sharing of this exam content is prohibited. 1 表單的頂端 What will be the result of adding the command ip dhcp excluded-address to the configuration of a local router that has been configured as a DHCP server? Traffic that is destined for and will be dropped by the router. Traffic will not be routed from clients with addresses between and . The DHCP server function of the router will not issue the addresses between and . The router will ignore all traffic that comes from the DHCP servers with addresses and . 表單的底部 ? Observable Description Max Value 1 correctness of response 2 points for Option 30 points for any other option 2  2 表單的頂端 An administrator is configuring a dual stack router with IPv6 and IPv4 using RIPng. The administrator receives an error message when trying to enter the IPv4 routes into RIPng. What is the cause of the problem? RIPng is incompatible with dual-stack technology. All interfaces have been configured with the incorrect IPv4 addresses. RIPv1 or RIPv2 needs to be configured in addition to RIPng to successfully use IPv4. When IPv4 and IPv6 are configured on the same interface, all IPv4 addresses are shut down in favor of the newer technology. 表單的底部 ? Observable Description Max Value 1 correctness of response 2 points for Option 30 points for any other option 2  3 表單的頂端 Refer to the exhibit. Which DHCP requests will R1 answer? all DHCP requests that R1 receives requests that are broadcast to 55 DNS requests with a destination of requests that are received on the FastEthernet 0/0 interface r