《遥控器盒盖的塑料模具设计毕业设计》.docVIP

摘要 塑料注射模具是工业生产的基础工艺设备，在电子、汽车、电机、电器、仪表、家电和通讯等产品中，60%-80%的零部件，都要依靠模具成形。它不仅直接影响工业产品的水平，也是一个国家工业化程度和机械制造工业技术水平的综合体现。 本文详细介绍了遥控器盒盖的塑料模具设计，主要包括：塑件材料的分析与设计方案的论证；注塑机的选择；模具结构的设计；成型零件的设计；导向机构的设计；脱模机构的设计；侧向分型与抽芯机构的设计等。本次设计为一模两腔，塑件材料选用了丙烯腈－丁二烯－苯乙烯共聚物（即工程材料ABS），浇口形式选用了侧浇口。通过以下计算和设计是可行的，并可以应用到实际生产中。 通过本设计，可以对注塑模具有一个初步的认识，注意到设计中的某些细节问题，了解模具结构及工作原理；通过对PROGRAM的学习，可以建立较简单零件的零件库，从而有效的提高工作效率。 关键词： 注塑模具；导向机构；脱模机构；遥控器 Abstract Plastic injection mold is industrial production process and equipment, based in electronics, automobile, motor, electrical, instrumentation, home appliance and communications, and other products, 60%-80% parts, all want to rely on that of die forming. It not only directly influences the level of industrial products, and also is a country degree industrialization and machinery manufacturing industry technology level of comprehensive embodiment. This paper introduces the mould design of remote controller. Mainly include analysis of plastic material and argumentation of design project; selecting injection machine; devising mold structure; devising molding parts; devising oriented framework; devising stripping framework; devising side parting and pulling framework. The mold is consisted of two cavities. The plastic material select acrylonitrile butadiene-styrene copolymer (i. e. engineering material ABS). The sprue form choose a side gate. By the following calculation and design is feasible, and can be applied to practical production. Through this design, may to cast the mold to have a preliminary understanding, notes in the design certain detail question, understands the mold structure and the principle of work; Through to the PROGRAM study, may establish the simple components the components storehouse, thus effective enhancement working efficiency. Key Words: Injection Mold; Devising Oriented Framework; Pulling Framework; Remote Control  主要符号表 公称压力 注射压力 最大注射量 收缩率 体积流