本科毕业论文---opticalnetworkofsdhgraduatethesiss正文.docVIP

Abstract In recent years, with the development of the information society, the global Internet business showed an explosive growth trend. The implementation of the fiber optical network of SDH is on the basis of the transmission platform of ZTE MP320, it can provide a simulation environment for the entire optic transmission network. This paper studies the technique of SDH network, describes the basic principle of SDH mapping multiplexing, structure of frame, categories of topology, and researches the methods of protection of the optic network. According to the instruction requirement, an optic transmission network with 9 nodes is set up, the services between two nodes are configured through the network with the costs or minimum resources of the network. The system time clock is configured and choose node D as primary clock. Office wire is completed and choose node D as controller of the network. Multiplexing section protection and path protection is finished. After careful design, realized simulations, performance tests show that the synchronous digital hierarchy network is reasonable, it can be used for practical engineering. Key words: SDH; networks; optical transmission; STM-N; networking; multiplexing; optical interface Table of Contents Chapter 1 Introduction 1 1.1 Background 1 1.2 Characteristics of SDH network 1 1.3 Research objectives and significance 2 Chapter 2 SDH Principles 4 2.1 SDH signal frame structure and multiplexing steps 4 2.1.1 SDH signal frame structure 4 2.1.2 SDH multiplexing step 6 2.2 SDH equipment logic function blocks 5 2.3 The basic network topology 6 2.4 Self-healing network 8 Chapter 3 SDH Network Architectures 10 3.1 A point-to-point SDH link 10 3.2 A SDH Ring Network 11 3.3 Multi-Ring SDH Topology 12 3.4 SDH Ring Protection Mechanisms 13 3.5 The Ring Protection Architectures 13 Chapter 4 Realization of Optic Transmission Network 18 4.1 Network topology 18 4.2 Networking realization 18 4.2.1 Set up the network nodes 19 4.