原创力文档模具人必备??模具英语100句（中英对照）
1. All in English Imperial Unit.
全部使用英文和英制单位。
2. Are part dimensions to print plus shrink？
请检查内模尺寸有否乘缩水？
3. All wires protected from sharp corners？
凡有电线通过的角位要改为R角，是否完成？
4. All replaceable components must be standard components.
所有替换的元件必须是标准件。
5. Add shot counter？
是否加啤塑总计器？
6. A complicated mould with thorough design consideration to overcome the numerous design contraints.
一个复杂的模具，设计经过周详考虑，成功地克服了各种设计上的限制。
7. All moving components should use hardened steel: all slides should be installed with hardened or lubricated alloy wear plates and gibs, and with
文档评论（0）