PCBA常用术语.pptVIP

* * * * * * * * 质量不良常用表达6 English Chinese no part 缺件 defect 缺陷 lacking resistor 缺电阻 Lacking capacitor 缺电容 misalignment 偏移 shift 偏移 control the condition of no solder 控制虚焊 jack defect 接口不良 the jack is very tight that make the assignment deficiently 接口太紧，导致作业不良 short at jack 接口短路 stripe 条纹 solder 焊锡 joint 焊点 fractured solder joint 焊点断裂 design defect 设计不良 Flex no good 软板不好 flex cut 软板切割不良 flex bubbles 软板有气泡 质量不良常用表达7 English Chinese dent 软板有凹陷 flex scratch 软板有擦痕 flex stain 软板污点 flex bend 软板折弯 Flex deform 软板变形 check the medicine connect well or not before check the board 测板之前先检查探针是否接触良好 demage d