D类功率放大器.docVIP

D类功率放大器 摘要：该设计是以FPGA为核心，将输入的正弦信号通过前级放大，由A/D采样转换为数字信号输入FPGA内，再由FPGA通过采样处理、采样输出脉冲实现数字脉宽的调制，输出的PWM波驱动全桥中的大功率MOS场效应管实现功率放大，最后经低通滤波器，重新获得正弦波信号。系统设计是基于FPGA的PWM的D类功率放大，实现全数字控制，效率高，输出功率大，噪声性能好。 关键字：D类功放 脉冲宽度调制 FPGA LPF Low Frequency Power Amplifier Abstract: The design is based on FPGA as core, input sinusoidal signal level before zoom, converted by A/D sampling digital signal input in FPGA, then processed by FPGA through sampling, sampling the output pulse of digital pulse-width modulation, PWM waves output driving high power MOS FET full bridge power amplifier, last through low-pass filter