fpga烧写flash详细步骤.docxVIP

烧写flash步骤：1、首先要生成.mcs文件。双击Create PROM File…2、选择Xlinx Flash/PROM3、单击箭头，我们的FPGA flash 大小为32M，device所以选择xcf32p。4、单击箭头，填写Output File Name，Output File Location，File Format 选择MCS。单击OK5、单击ok添加要转换的bit文件。注意：bit文件路径中不能有中文！6、双击Generate File开始转换，转换完成后会出现Generate Succeed 图标。7、这时在生成路径下可以看到.mcs文件8、设置我们的烧写模式为Parallel Mode，开始烧写。9、烧写完毕后，关闭电源，取下仿真器，然后再重新上电即可。staff and workers representativesThe representatives of the staff and workers from the unit or away from retirement, on behalf of automatically disqualified, on behalf of the delegation to the original vacancy shall be in accordance with the provisions of t