保温门块工艺规程设计.docVIP

摘 要 本文研究的课题是结合某环境试验室的保温门研究项目而进行的。论文根据试验室的要求，针对保温门系统手动拆装费时的现状以及对温度的要求，研制出能够根据试验要求而实现自动开启并可耐自然情况下极低或极高温度的保温门系统。 论文对国内外各种保温门的现状进行了分析，确定了自动保温门的总体设计方案以及工艺规程设计方案。该方案中门块壳体材料取玻璃钢铸造，壳体厚度18mm,为减小门块的变形，在每块门玻璃钢壳体内放置两排、四段120mm×120mm、长1200mm空心方钢支架保证门块具有足够的刚度，壳体内部充填聚氨酯发泡绝热材料。 通过对保温门的结构设计，得出其制造的工艺设计规程，以此制造出适合试验室的保温门。并在此基础上进行了精度误差的计算分析，确保其在试验室的正常使用。 关键词：保温门 科研 结构设计 工艺规程 Abstract This dissertation is combined with the reconstruct item that is the heat-insulatied door for the environmental testing labotatoty.The dissertation is according to the request of testing laboratory,carry on the reconstruct to already existing manual disasembly and assembly time-consuming,designing can require to realize the automatically controlled heat-insulatied door system according to the test. The essay on the status of the insulatied door at home and abroad were analyzed to determine the automatic insulatied door and the overall design process planning program. Block the doors of the program to take glasssteel,casting shell material, shell thickness of 18mm, to reduce the deformation of the block the door, glass door in each two rows of steel and four section placed on the body, 120mm × 120mm, 1200mm long hollow square steel frame to ensure that the door block with sufficient rigidity, the shell filled with polyurethane foam insulation inside. Through the structural design of the door, come to its manufacturing process design rules, thereby creating room for testing insulatied door.And on this basis the accuracy of the calculation error, to ensure the normal use in the laboratory. Key words:Heat-insulatied door;Research;Structural Design;Process planning 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 课题研究的背景 1 1.2 保温门的国内外发展现状 1 1.3 研究的意义和必要性 4 1.4 本文研究的主要内容 5 第2章 保温门块结构设计 6 2.1保温门块主要技术指标 6 2.2 使用要求 6 2.3 保温门门块结构设计 6 2.3.1保温门块设计 6 2.3.2 保温门块的材质 8 第3章 保温门块工艺规程设计 9 3.1 分析零件图和产品装配图 9 3.2 对零件图和装配图进行工艺审查 9 3.3 由产品的年生产纲领和产品自身特性研究确定零件生产类型 9 3.4 确定毛坯 10 3.5 拟定工艺路线 10