拉伸件模具设计【参考】.docVIP

镇流器外壳冲压模具设计 摘 要 本文首先简要的概述了冲压模具在社会发展领域中的作用及其以后的发展方向，点明了模具设计的重要意义。然后依据工件图进行了工艺性分析，进而确定了设计方案，计算出了模具工作部分的尺寸，设计出工作零部件；然后依据设计要求选择出各个标准零部件，最后设计出了模具的总装配图。在设计中，最重要的就是设计方案的确定、坯料的计算和工作零部件的设计，这是设计的关键，这些设计的正确与否直接关系到设计成本的高低及设计的模具能否正常工作。 设计过程中，首先对镇流器外壳的落料工序、拉伸工序和凸缘的修整工序进行了分析，并对与这些工序相关的模具在设计和制造中存在的若干关键性问题进行了研究。所要解决的难题就是如何计算并防止出现拉伸皱曲,拉伸破裂,拉深凸耳等缺陷,使得冲压成形达到我们所要求的质量。然后用CAD制图软件画出了十几张零件图，安插在设计说明书书中。最后画出了镇流器外壳落料拉深复合模的装配图一张。 关键词：模具，落料，拉深，缺陷 The Design Of Press Tool About Barreter Case ABSTRACT This article first brief outline ramming mold in social development domain function and its later development direction,Had pointed out the mold designs vital significance. Then has carried on the technological analysis based on the work piece chart,Then has determined the design proposal,Calculated the mold effective range size,Designs the work spare part; Then chooses each standard spare part based on the design request,Finally designed the mold assembly drawing. In design,Most important is the design proposal determination, the semifinished materials computation and the work spare part design,This is the design key, Whether these designs is correct or not relates directly to the design cost height and the design mold normal work In design final,Summarized own in the design process attainment and the experience,And instructs teacher to me to carry on expresses thanks. In design process,First fell the material working procedure, the stretch working procedure and the flange to the gasket repairs and maintains the working procedure to carry on the analysis And to certain crucial question which existed in the design and the manufacture has conducted the research with these working procedure correlations molds., Then I used the CAD charting software to draw several detail drawings,Places in the design instruction booklet book. Finally drew the gasket to fall the material drawing superposable die assembly drawing. KEY WORDS: Mould，，，目　录 前　言 1 第1章 带凸缘的圆筒件工艺性分析 5 1.1冲压件工艺性分析 5 1.1.